Independent BRPL & BYPL consumer guide

Your BSES solar route starts with the logo on your electricity bill.

BSES Rajdhani and BSES Yamuna serve different Delhi territories and use different consumer portals. This guide helps you organise the right application, system file and commissioning sequence.

Book a free site survey Estimate size and savings

Fact-checked 10 August 2026

West & South Delhi

BRPL

Use the BRPL route shown on the electricity bill and official rooftop solar portal.

East & Central Delhi

BYPL

Use the BYPL renewable-energy/net-metering workflow and its current document list.

First document

Electricity bill

It identifies the DISCOM, CA number, registered consumer and connection category.

BRPL and BYPL are not one application queue

Both are BSES utilities, but an application must follow the DISCOM named on the consumer’s bill.

BRPL receives rooftop solar/net-metering requests through its published rooftop solar route, including the online portal.
BYPL publishes a separate renewable-energy page, application route, forms, DT-capacity information and net-metering contacts.
Do not upload a BRPL consumer file to a BYPL workflow or use locality alone when the bill gives the authoritative utility.

Prepare the consumer file before the portal

Recent bill, CA number, registered consumer name, category, sanctioned load and registered mobile number.
Identity and property/roof-right documents, including co-owner or society authority where required.
Proposed capacity, module and inverter datasheets, roof layout and single-line diagram.
For subsidy cases, confirm National Portal registration, vendor route and applicable DCR/ALMM requirements.
Keep documents legible and consistent; small naming or capacity mismatches can create avoidable deficiencies.

What feasibility and commissioning protect

Feasibility is not a product recommendation. It is the utility’s technical check that the proposed system can connect under the applicable network and consumer conditions.

The submitted system capacity should match the approved and installed configuration.
Metering space, wiring, protection, earthing and isolation should be ready for inspection.
Invoices, equipment serial numbers, test records and installation photographs should form one consistent completion file.
Commissioning and meter work complete the utility process; panel installation alone does not.

How PM Surya Ghar fits into a BSES project

Eligible residential consumers use the official scheme workflow and select the correct DISCOM.
Central household assistance currently reaches a maximum of ₹78,000 for systems of 3kW or more.
Delhi’s amended policy states additional residential support up to ₹30,000, subject to the live state process.
BSES performs utility-side feasibility, metering and commissioning checks; the installer does not approve subsidy or grid connection.

BRPL or BYPL: which route applies?

Bill shows	Typical Delhi territory	Official route
BSES Rajdhani Power Limited (BRPL)	Primarily South and West Delhi	BRPL rooftop solar portal: rts.bsesdelhi.com
BSES Yamuna Power Limited (BYPL)	Primarily East and Central Delhi	BYPL renewable-energy page and net-metering portal
Another utility	Outside the relevant BSES licence area	Use the DISCOM named on the bill; do not use a BSES application

Y2 Solar process

One coordinated file from first survey to net meter.

01
Identify BRPL or BYPL from the bill and verify the CA number, consumer name, category, sanctioned load and mobile details.
02
Survey the roof and electrical route, then size the system against consumption and feasible shadow-free area.
03
Prepare the application, datasheets, single-line diagram and ownership/authority documents for the correct BSES route.
04
Address feasibility observations and freeze the approved capacity, equipment and system drawings.
05
Install with required structure, wiring, protection, earthing, labels and inspection evidence.
06
Coordinate inspection, meter requirements, commissioning records and subsidy-status follow-up where applicable.

Frequently asked questions

Is Y2 Solar part of BSES?

No. Y2 Solar is an independent installer. BRPL/BYPL control their portals, feasibility, meters, commissioning and official consumer communications.

How do I know whether I am BRPL or BYPL?

Check the company name and logo on the electricity bill. Use the bill rather than an assumed locality boundary.

Can a BSES consumer receive PM Surya Ghar subsidy?

An eligible residential consumer may apply through the official scheme workflow, subject to vendor, equipment, DISCOM, inspection and commissioning requirements.

Does BSES buy all surplus solar electricity?

Billing adjustment and any year-end settlement follow DERC rules and the relevant DISCOM implementation. Size primarily around consumption and confirm the current treatment.

Can installation start before BSES feasibility?

For an approval- or subsidy-led project, follow the current official sequence and secure the required feasibility position before final installation.

Where should a BYPL consumer submit a query?

Use BYPL’s official renewable-energy/net-metering page and its published application/contact route. Avoid sending consumer details to unofficial portals.

Continue your research

Net metering Delhi →

Understand the common feasibility, metering and commissioning stages.

PM Surya Ghar →

Review current central and Delhi residential assistance.

Solar prices →

Compare equipment, structure, approvals and service scope.

Built around your roof and bill

Get a site-specific solar proposal—not a generic package.

Request a free assessment

Y2 Solar

Loading page

BRPL and BYPL are not one application queue

Both are BSES utilities, but an application must follow the DISCOM named on the consumer’s bill.

BRPL receives rooftop solar/net-metering requests through its published rooftop solar route, including the online portal.

BYPL publishes a separate renewable-energy page, application route, forms, DT-capacity information and net-metering contacts.

Do not upload a BRPL consumer file to a BYPL workflow or use locality alone when the bill gives the authoritative utility.

Prepare the consumer file before the portal

Recent bill, CA number, registered consumer name, category, sanctioned load and registered mobile number.

Identity and property/roof-right documents, including co-owner or society authority where required.

Proposed capacity, module and inverter datasheets, roof layout and single-line diagram.

For subsidy cases, confirm National Portal registration, vendor route and applicable DCR/ALMM requirements.

Keep documents legible and consistent; small naming or capacity mismatches can create avoidable deficiencies.

What feasibility and commissioning protect

Feasibility is not a product recommendation. It is the utility’s technical check that the proposed system can connect under the applicable network and consumer conditions.

The submitted system capacity should match the approved and installed configuration.

Metering space, wiring, protection, earthing and isolation should be ready for inspection.

Invoices, equipment serial numbers, test records and installation photographs should form one consistent completion file.

Commissioning and meter work complete the utility process; panel installation alone does not.

How PM Surya Ghar fits into a BSES project

Eligible residential consumers use the official scheme workflow and select the correct DISCOM.

Central household assistance currently reaches a maximum of ₹78,000 for systems of 3kW or more.

Delhi’s amended policy states additional residential support up to ₹30,000, subject to the live state process.

BSES performs utility-side feasibility, metering and commissioning checks; the installer does not approve subsidy or grid connection.

Bill shows

Typical Delhi territory

Official route

BSES Rajdhani Power Limited (BRPL)

Primarily South and West Delhi

BRPL rooftop solar portal: rts.bsesdelhi.com

BSES Yamuna Power Limited (BYPL)

Primarily East and Central Delhi

BYPL renewable-energy page and net-metering portal

Another utility

Outside the relevant BSES licence area

Use the DISCOM named on the bill; do not use a BSES application

One coordinated file from first survey to net meter.

Identify BRPL or BYPL from the bill and verify the CA number, consumer name, category, sanctioned load and mobile details.

Survey the roof and electrical route, then size the system against consumption and feasible shadow-free area.

Prepare the application, datasheets, single-line diagram and ownership/authority documents for the correct BSES route.

Address feasibility observations and freeze the approved capacity, equipment and system drawings.

Install with required structure, wiring, protection, earthing, labels and inspection evidence.

Coordinate inspection, meter requirements, commissioning records and subsidy-status follow-up where applicable.

Frequently asked questions

Is Y2 Solar part of BSES?

No. Y2 Solar is an independent installer. BRPL/BYPL control their portals, feasibility, meters, commissioning and official consumer communications.

How do I know whether I am BRPL or BYPL?

Check the company name and logo on the electricity bill. Use the bill rather than an assumed locality boundary.

Can a BSES consumer receive PM Surya Ghar subsidy?

An eligible residential consumer may apply through the official scheme workflow, subject to vendor, equipment, DISCOM, inspection and commissioning requirements.

Does BSES buy all surplus solar electricity?

Billing adjustment and any year-end settlement follow DERC rules and the relevant DISCOM implementation. Size primarily around consumption and confirm the current treatment.

Can installation start before BSES feasibility?

For an approval- or subsidy-led project, follow the current official sequence and secure the required feasibility position before final installation.

Where should a BYPL consumer submit a query?

Use BYPL’s official renewable-energy/net-metering page and its published application/contact route. Avoid sending consumer details to unofficial portals.